Aventon Abound SR – Tail Light Cover (Design Improvement)Updated 2 days ago
This article explains how to install the updated tail light cover improvement for the Aventon Abound SR.
This article applies to:
Aventon Abound SR
Use this article if:
you received an Aventon tail light improvement kit
your rear tail light cover requires installation
you want to add additional protection to the rear tail light area
This improvement is designed to help protect the rear tail light from accidental damage.
If anything looks damaged or unsafe during installation, stop and contact support before continuing.
Before You Start
Please prepare the following:
order number or proof of purchase
Aventon Abound SR model confirmation
photo of the current tail light area if needed
the supplied tail light improvement kit
a size 4 wrench
a clean workspace
Before starting:
power the bike off completely
ensure the bike is stable and secure
avoid pulling or straining the tail light wiring
Safety Warnings
Do not work on the bike while it is charging.
Do not force bolts, wiring, or connectors.
Do not pull on the tail light wiring.
Stop and contact support if anything appears damaged or unsafe.
Do not continue if the tail light wiring becomes pinched or damaged during installation.
What This Improvement Means
The Abound SR tail light improvement adds additional protection around the rear tail light area.
This helps reduce the chance of accidental damage to the tail light during normal handling and movement of the bike.
This improvement is precautionary and is intended to help protect the tail light assembly.
Possible Causes of Tail Light Damage
Possible causes may include:
accidental pressure applied to the tail light
impact while moving or storing the bike
strain on the tail light housing
improper handling around the rear rack area
Installation Steps
Step 1 – Remove the Tail Light
Use a size 4 wrench to loosen the two nuts securing the tail light to the rack.
Turn the nuts counter-clockwise and place the sleeve nuts aside safely.
If yes
If the tail light loosens correctly, continue to Step 2.
If no
Do not force the hardware.
Please contact our support team with photos of the tail light area so we can review the next step.
If the issue clears
Continue with installation.
If the issue remains
Contact support.
Step 2 – Remove the Tail Light Bolts
Remove the two bolts holding the tail light in place.
Keep all hardware together for reinstallation.
If yes
Continue to Step 3.
If no
Do not force the bolts.
Please contact support with photos of the hardware and tail light area.
If the issue clears
Continue with installation.
If the issue remains
Contact support.
Step 3 – Install the Protective Seat
Insert the tail light into the middle hole of the protective seat.
Ensure the bend of the protective seat faces towards the outside of the rack.
If yes
Continue to Step 4.
If no
Check the alignment and orientation of the protective seat.
Do not force the parts into position.
If the issue clears
Continue with installation.
If the issue remains
Contact support.
Step 4 – Install the Tail Light Long Bolts
Insert the two long bolts from the kit into the two outer bolt slots on each side.
Insert the bolts upward and ensure they are fully seated.
If yes
Continue to Step 5.
If no
Remove the bolts and check alignment again.
Do not cross-thread or force the bolts.
If the issue clears
Continue with installation.
If the issue remains
Contact support.
Step 5 – Align the Tail Light and Protective Seat
Align the tail light bolts with the two long slots on the protective seat.
The protective seat should wrap around the bottom of the tail light.
If yes
Continue to Step 6.
If no
Recheck the orientation of the protective seat and bolt alignment.
Do not force the assembly into place.
If the issue clears
Continue with installation.
If the issue remains
Contact support.
Step 6 – Reinstall the Tail Light
Align the assembled tail light and protective seat with the mounting holes on the rack.
Use the size 4 wrench to tighten the two sleeve nuts clockwise.
After installation:
ensure the tail light is secure
confirm the wiring is tidy and not pinched
confirm the tail light remains properly aligned
If yes
Test the tail light operation.
If no
Stop installation and contact support.
If the issue clears
The installation is complete.
Monitor the tail light area during normal use.
If the issue remains
Please contact our support team with the photos/videos listed below so we can review the next step.
When To Contact Support
Please contact support if:
the tail light cannot be secured correctly
hardware does not align properly
the tail light wiring appears damaged or pinched
bolts or nuts cannot be installed safely
the tail light becomes loose after installation
there is visible damage to the rack or tail light
you are unsure how to safely complete the installation
If the issue remains after this step, please contact our support team and include the photos/videos listed below.
What To Send Support
Please send:
order number or proof of purchase
Aventon model confirmation
photos of the tail light area
photos of the installed improvement kit
photos of any visible damage
photos of any hardware or alignment issue
confirmation of whether the tail light still functions correctly
confirmation of whether the wiring appears secure
confirmation of the steps already completed from this article
Important Safety Notes
Do not continue riding if the tail light is loose or damaged.
Do not ride if the tail light wiring is exposed or pinched.
Do not force bolts, nuts, or mounting hardware.
Do not pull on the tail light wiring.
Do not work on the bike while it is powered on or connected to the charger.
Contact support if you are unsure about any step.