Aventon Mid Drive – W112 Altitude Sensor Hardware Module Disconnect TroubleshootingUpdated 2 days ago
This article explains how to troubleshoot the W112 Altitude Sensor Hardware Module Disconnect error on Aventon mid drive eBikes.
Use this article if your bike:
shows a W112 error code
displays an altitude sensor warning
has sensor or ECU communication issues
shows intermittent hardware module connection warnings
If you are unsure about any step or anything looks unsafe, stop and contact support before continuing.
Before You Start
Please prepare the following before troubleshooting:
your order number
your Aventon model
a photo or video of the W112 error code
a photo or video showing the issue
when the issue first appeared
confirmation of whether the bike powers on
confirmation of whether the display turns on
confirmation of whether the bike connects to the Aventon app
confirmation of whether the issue started after transport, storage, software update, water exposure, impact, modification, or third-party repair
photos of any visible damage
Safety Warnings
Do not continue riding if the bike has a persistent error code.
Do not continue riding if there is visible damage, overheating, smoke, or a burning smell.
Do not open sealed electrical components.
Do not work on wiring while the bike is powered on or charging.
Stop and contact support if you are unsure about any step.
What This Error Means
The W112 error means the altitude sensor hardware module has disconnected.
This may happen due to:
a software issue in the current ECU version
a damaged altitude hardware module
Possible Causes
Possible causes include:
software issue in the ECU version
damaged altitude hardware module
Troubleshooting Steps
Step 1 – Restart the Bike
Power off the bike completely.
Wait approximately 10 seconds.
Then power the bike back on.
Check whether the W112 error is still displayed.
If yes
If the W112 error remains after restarting:
continue to Step 2
If no
If the W112 error clears after restarting:
continue monitoring the bike during normal use
If the issue clears
The issue may have been caused by a temporary communication or software issue.
Continue monitoring the bike.
If the issue remains
Continue to Step 2.
Step 2 – Update the ECU Software
Open the Aventon app and check for available ECU software updates.
If updates are available:
update the ECU software to the latest version using the Aventon app
keep the bike powered on during the update process
do not disconnect the app during updates
After the update:
restart the bike
reconnect the bike to the Aventon app
check whether the W112 error remains
If yes
If the W112 error clears after the update:
continue monitoring the bike during normal use
If no
If the W112 error remains after updating:
continue to Step 3
If the issue clears
The issue was likely related to ECU software communication.
Continue monitoring the bike.
If the issue remains
Continue to Step 3.
Step 3 – Check Whether the Issue Persists
After restarting and updating the ECU software, check whether the W112 error still appears.
If yes
If the W112 error remains:
stop using the bike
please contact our support team with the photos and videos listed below so we can review the next step
If no
If the W112 error no longer appears:
continue monitoring the bike during normal riding
If the issue clears
The issue may have been caused by a temporary ECU software or communication issue.
Continue monitoring the bike.
If the issue remains
Please contact support.
When To Contact Support
Please contact support if:
the W112 error remains after completing the steps above
the bike does not power on
the display does not turn on
the bike cannot connect to the Aventon app
there is visible damage
the issue appears to involve the ECU, altitude sensor module, connector, cable, controller, or internal wiring
the bike has been exposed to water, crash damage, impact, transport damage, modification, or third-party repair
you are unsure how to safely complete any step
If the issue remains after this step, please contact our support team and include the photos/videos listed below.
What To Send Support
Please send the following:
your order number
your Aventon model
a photo or video of the W112 error code
a photo of the display
screenshots of the Aventon app, if relevant
photos of any visible damage
confirmation of whether the bike powers on
confirmation of whether the display turns on
confirmation of whether the bike connects to the Aventon app
confirmation of whether ECU software updates were attempted
confirmation of whether the issue started after transport, storage, software update, water exposure, impact, modification, or third-party repair
confirmation of which troubleshooting steps you have already completed
Important Safety Notes
Do not continue riding if the W112 error remains.
Do not ride the bike if there is visible damage, overheating, smoke, a burning smell, or water exposure.
Do not open the battery, controller, ECU, altitude sensor module, or sealed electrical components.
Do not force connectors or electrical components.
Do not work on wiring while the bike is powered on or connected to the charger.
Contact support if you are unsure about any step.