📄 Full Manual

You can download the manual here.

📦 WHAT’S INCLUDED

• Charger
• Kickstand
• Pedals (left & right)
• Front & rear reflectors + mounts
• Wheel reflectors
• Headlight + mount
• Tools (L-shaped wrench, combination wrench)
• Grease
• Wire buckles
• Manuals

🧩 PRODUCT OVERVIEW

Main components:

• Display + control pad
• Mid-drive motor (250W)
• Front & rear brakes
• Suspension fork
• Drivetrain (chain, derailleur, cassette)
• Battery (removable)
• Wheels and tires
• Headlight and reflectors

⚙️ FULL SETUP & ASSEMBLY

Key Steps

1. Unbox bike and remove packaging
2. Install handlebar and stem faceplate
3. Install dropper post lever
4. Install front wheel:
   • Align with fork
   • Tighten axle securely
5. Install kickstand
6. Inflate tires:
   • 20–40 PSI depending on rider weight
7. Install pedals:
   • Right = clockwise
   • Left = counterclockwise
   • Torque: ~30–35Nm
8. Align and tighten handlebars
9. Install and adjust seat
10. Adjust dropper post height
11. Install headlight and connect wiring
12. Secure all wiring with buckles
13. Connect control cables
14. Turn ON display to confirm setup

👉 All bolts, wiring, and components must be checked before riding

🔋 BATTERY & CHARGING

Charging Steps

1. Turn battery OFF
2. Open charging port
3. Connect charger to battery
4. Plug into outlet
5. Wait until fully charged
6. Disconnect (wall first, then bike)

Charging Indicators

• Red = charging
• Green = fully charged

Battery Indicator

• Blue = 66–100%
• Green = 33–66%
• Red = 0–33%

Charging Rules (CRITICAL)

• Charge between 0°C – 40°C
• Do NOT charge more than 12 hours
• Do NOT leave unattended
• Use original charger only
• Charge on hard surface (concrete/brick)
• Do NOT cover charger

Battery Specs

• 36V / 19.2Ah
• Range: up to 45 miles (PAS mode)
• Charging time: ~4–5 hours

Battery Removal

1. Open battery cover
2. Insert key and turn
3. Battery will pop up partially
4. Press release plate to remove fully

Battery Installation

• Insert battery firmly
• Push until you hear “CLICK”
• Ensure no gap between battery and frame
• Confirm it is securely locked

Battery Storage

• Store at ~75% charge
• Temperature: 0°C – 40°C
• Check monthly

STOP USING IMMEDIATELY IF:

• Overheating
• Smell or smoke
• Leakage
• Deformation

🎮 CONTROLS & OPERATION

Power

• Press and hold power button

Assistance Levels

• Adjustable using “+ / –”
• Includes multiple PAS levels

WALK MODE

• Hold “–”

Lights

• Hold “+” for 3 seconds

Riding Data Display

• Speed
• Battery level
• Power output
• Assist level
• Trip data
• Riding time

Menu Functions

• Units (km/h ↔ mph)
• Brightness settings
• Auto power OFF timer
• Trip reset
• Time settings
• System information
• App connection (QR code)

🔒 SMART / APP FEATURES

Aventon App

• Connect via QR code
• View ride data
• Adjust settings

🛵 HOW TO RIDE

1. Turn bike ON
2. Select assist level
3. Start pedaling
4. Adjust gears as needed
5. Use brakes to stop

Important

• Pedal assist activates when pedaling
• Practice in a safe area before riding in traffic

⚙️ PRE-RIDE CHECKLIST

Before EVERY ride:

• Brakes working properly
• Tires inflated (20–40 PSI)
• Battery charged and locked
• No loose bolts
• Lights and reflectors working
• Cables connected and undamaged

🔧 MAINTENANCE

Regular Checks

• Brakes and brake pads
• Chain and drivetrain
• Tires and wheels
• Bolts and hardware
• Electrical cables

Service Intervals

• Before every ride: inspection
• Weekly: general check
• Monthly: adjustments and lubrication
• Every 6 months: full service

⚠️ SAFETY GUIDELINES

MUST DO

• Wear helmet
• Follow local laws
• Inspect bike before riding

DO NOT:

• Ride under influence
• Ride in heavy rain
• Modify components
• Perform jumps or stunts

Riding Safety

• Ride with traffic
• Use hand signals
• Avoid hazards (gravel, potholes, wet surfaces)
• Brake earlier in wet conditions

Wet Riding

• Reduce speed
• Increase braking distance

Night Riding

• Use lights and reflectors
• Wear reflective gear

🚨 WARNING CODES (FROM MANUAL)

⚡ ERROR CODES (FROM MANUAL)

⚠️ FINAL NOTES

• Stop riding if any error appears
• Do NOT override safety systems
• Service major faults professionally
• Increased wear is normal on e-bikes

https://www.youtube.com/watch?v=btBCnd1jFak