Dualtron Forever – Full Setup, Charging, App Features, Operation & Safety GuideUpdated a month ago

Full Manual

Overview

The Dualtron Forever is an electric scooter designed for personal mobility and urban commuting. This guide covers setup, controls, riding instructions, connectivity, and key product information.

Safety & Rider Requirements

• Recommended age: 16–60 years
• Recommended height: 120–200 cm
• Maximum rider weight: 100 kg

Always ride carefully and remain aware of road conditions. The manual warns that hard braking may result in serious injury.

What’s in the Box

• Dualtron Forever scooter
• Battery charger
• Manual
• Screw caps × 2
• Multitool × 1

Key Components & Controls

Main Components

• EY3 display (Dualtron app compatible)
• Handlebar and handle post (steering tube)
• QR lever and locking slide
• Folding bracket
• Front motor
• Front and rear suspension
• Front and rear fenders
• Front lamp and headlight with horn
• Spoiler/footrest with light
• Charging port
• Rubber deck
• Kickstand
• 10-inch tube tyres

Controls & Functions

• Power button
  • Press and hold to turn the scooter on or off
  • Short press to adjust the speed gear
• Accelerator
  • Pull the throttle to accelerate
• Light button
  • Press to turn the headlight on or off
• Turn signal button
  • Press the left or right side to activate turn signals
  • The signal will blink when activated
• Horn button
  • Press to sound the horn once
• Set button
  • Press and hold to enter or exit ECO mode
  • Press to switch battery percentage display
• Mode button
  • Press and hold to enter mode settings
  • Automatically returns to the main interface after a short period
  • Press to switch riding modes

Assembly Instructions

Steering Tube Setup

1. Release the QR lever.
2. Raise the locking slide upward.
3. Raise the steering tube.
4. Lower the locking slide to secure it.
5. Tighten the finishing screw to lock the QR lever.
6. Ensure the locking slide is firmly fixed and check for looseness during use.

Handlebar Setup

1. Loosen the QR lever.
2. Pull the locking slide inward and raise the handlebar.
3. Close the QR lever and tighten the set screw.
4. Align the locking slide with the safety line and lock it securely.
5. Check for looseness during use.

Bluetooth & App Connection

App Setup

1. Download the Dualtron app by scanning the QR code or searching “DUALTRON”.
2. Install and log in.
3. Power on the scooter.

Pairing

1. Tap Search vehicle in the app.
2. Pair with your scooter.
3. The scooter is connected when the Bluetooth symbol lights up.

Ownership Binding

• Select Bind as owner
• Only authorised users can connect to the scooter
• Authorisations are managed within the app

How to Ride

Starting

1. Power on the scooter.
2. Choose a speed mode before riding.
   • The manual notes that speed mode can be selected via the Dualtron app
3. Stand on the footboard with one foot and push off with the other to start gliding.
4. Ensure SAFE mode is disabled (SAFE mode is configured via the app and can be deactivated by squeezing the brake lever).

Riding

• Place both feet on the deck and maintain balance
• Pull the throttle to accelerate

Slowing Down

• Release the throttle
• Squeeze the brake levers

Turning

• Shift your body weight
• Turn the handlebar gently
• Ensure sufficient turning space and monitor road conditions

Safety Note

• Hard braking may cause serious danger or injury
• Maintain a moderate speed and remain alert to hazards

Folding & Storage

1. Loosen the QR lever and move the locking slide upward.
   • Hold the steering tube to prevent it from falling.
2. Loosen the QR lever again and push the locking slider inward.
3. Fold the handlebars down.
4. Lay the steering tube down while raising the locking slide.
5. Lock the handlebar hook to the folding bracket.
6. Ensure the handlebar is securely locked before lifting the scooter.

Specifications

General

• Model: Dualtron Forever
• Drive system: Dual motor drive
• Motor type: BLDC hub motor
• Maximum speed: 25 km/h

Battery & Range

• The manual includes battery capacity and range details; however, some values are not clearly legible in the extracted text
• Charging ambient temperature: 0°C to 40°C
• Battery protection includes:
  • Overheating
  • Short circuit
  • Over-current
  • Over-discharge
  • Over-charge
• Battery protection activates when temperature exceeds approximately 55°C

Tyres & Suspension

• Tyres: 10-inch tube tyres
• Tyre pressure: approximately 50 PSI
• Material: rubber
• Suspension:
  • Rubber suspension cartridge system
  • Multiple hardness options (soft to hardest)

Braking & Charging

• The manual indicates a disc brake system with electronic braking (ABS & EBS)
• Charger input: 100–120V / 200–240V

Some detailed values in this section are not fully legible in the extracted manual text and should be confirmed directly if required for specification listings. 

Operating Conditions

• Traversable terrain:
  • Asphalt or flat pavement
  • Obstacles under 5 cm
  • Gaps under 5 cm
• Operating temperature: approximately -5°C to 45°C
• Storage temperature: approximately -20°C to 50°C

Additional Notes

• Speed, range, and performance may vary depending on rider weight, terrain, temperature, and riding behaviour
• The Dualtron app supports connectivity and configuration settings
• Users are responsible for understanding and complying with local laws and regulations regarding scooter use