InMotion Air / Air Pro โ Full Setup, Charging, Operation & Error Codes GuideUpdated a month ago
๐ Full Manual
You can download the manual here.
๐ฆ Whatโs Included
- Assembled e-scooter
- Power cable
- Power adapter
- Handlebars
- Inner tube
- M5 wrench
- User manual
- Quick start guide
๐งฉ Product Overview
Main components:
- Handlebar
- Dashboard display
- Power button
- Throttle
- Brake lever
- Bell
- Headlight
- Stem
- Folding mechanism
- Charging port
- Front and rear wheels
- Mudguards
- Reflectors
- Footrest
- Kickstand
- Air valve
๐ฎ Dashboard & Controls
Display Information
- Speedometer (real-time speed)
- Battery level (5 bars, last flashing = low battery)
- Speed unit (km/h or mph)
- Error indicator
- Cruise control indicator
- Light indicator
- Bluetooth indicator
- Pedestrian mode indicator
Controls
- Power ON/OFF: Hold button for 2 seconds
- Lights ON/OFF: Press power button once
- Change riding mode: Double press power button
- Change units (km/miles): Press power button 3 times
Riding Modes
- Pedestrian mode: up to 6 km/h
- Drive mode (D): up to 25 km/h
- Sport mode (S):
- Air: up to 30 km/h
- Air Pro: up to 35 km/h
Cruise Control
- Activates automatically when maintaining constant speed
- Deactivates when braking or accelerating
โ๏ธ Assembly
Steps
- Remove scooter from packaging
- Unfold the stem and lock the folding mechanism
- Ensure locking pin is secure
- Install handlebars on stem (follow left/right markings)
- Tighten using M5 wrench
- Install and secure brake lever
๐ Ensure all components are tightly secured before riding
๐ Folding & Carrying
To Fold
- Power OFF scooter
- Press locking button
- Pull folding lever
- Fold stem down
- Hook onto rear locking clip
To Carry
- Hold the stem securely
- Be cautious of weight and balance
๐ Charging
Steps
- Open rubber charging port cover
- Plug charger into scooter
- Plug charger into wall outlet
- Wait until fully charged
- Unplug and close port
Charger Indicators
- Red = charging
- Green = fully charged
Important Charging Rules
- Do NOT charge if wet
- Use original charger only
- Do NOT charge indoors
- Close charging port after charging
- Stop charging if battery overheats, smells, or leaks
๐ฑ App & Activation (IMPORTANT)
The scooter is limited until activated.
Steps:
- Download INMOTION App
- Turn scooter ON
- Connect via Bluetooth
- Follow instructions to activate
๐ Before activation:
- Speed limited (~5 km/h)
- Modes cannot be changed
๐ต How to Ride
- Wear protective gear
- Turn scooter ON
- Check battery level
- Push off with one foot
- Place both feet on deck
- Press throttle to accelerate
๐ Motor only activates after ~3 km/h
Braking
- Release throttle
- Apply brake gently
- Avoid sudden braking
๐ง Tire Inflation
- Max pressure: 350 kPa (50 PSI)
- Check regularly
- Maintain proper pressure for safety and performance
โ ๏ธ Safety Guidelines
General
- Always wear a helmet
- Ride on flat, stable surfaces
- Follow local laws
Do NOT:
- Ride in rain, wet, icy, or slippery conditions
- Ride on highways or public roads with vehicles
- Carry passengers
- Ride with one hand or one foot
- Use phone or headphones while riding
- Ride over obstacles, stairs, or rough terrain
- Touch motor after riding (may be hot)
- Ride under influence of alcohol or drugs
- Ride if pregnant or with balance issues
Additional Safety Notes
- Max rider weight: 120 kg
- Recommended age: 14โ60 years
- Always inspect scooter before riding
- Stop immediately if abnormal sounds or issues occur
- Ensure visibility and awareness of surroundings
๐ง Maintenance
Cleaning
- Use damp cloth
- Do NOT use solvents or chemicals
- Do NOT use high-pressure water
Battery Care
- Charge after each use
- Do NOT fully drain battery
- Charge every 90 days if not in use
- Avoid extreme temperatures
- Do NOT open or modify battery
Storage
- Store in cool, dry place
- Avoid sunlight, heat, and moisture
โ ๏ธ ERROR CODES
| Code | Meaning | Action |
|---|---|---|
| 01 | Controller error | Restart or contact service |
| 02 | Motor (hall) error | Contact service |
| 03 | Battery error | Contact service |
| 04 | Low battery voltage | Charge battery |
| 05 | High battery voltage | Stop using and contact service |
| 06 | Brake self-test failure | Release brake / check lever |
| 07 | Throttle self-test failure | Release throttle / check condition |
| 08 | โ | โ |
| 09 | Dashboard communication error | Restart or contact service |
| 10 | Controller communication error | Restart or contact service |
| 11 | Controller overheating | Stop riding and let cool |
| 12 | Motor overheating | Stop riding and let cool |
๐จ What to Do if You See an Error
- Restart the scooter
- Check throttle and brake position
- Charge battery if needed
- Stop riding if overheating
- Contact support if issue persists
๐ Specifications
General
- Max speed:
- Air: 30 km/h
- Air Pro: 35 km/h
- Range:
- Air: ~35 km
- Air Pro: ~48 km
- Max load: 120 kg
- Weight: ~15.7 kg / 17.7 kg
- IP rating: IP55
Battery & Motor
- Battery: 270Wh / 438Wh
- Voltage: 36.5V nominal / 42V max
- Motor power: 350W
- Ride modes: D / S
Charging
- Charging time: ~4.5h โ 8.5h
- Charger output: 42V / 2A
Assembly/setup video:ย