InMotion C10 (C Series) – Full Setup, Charging, Operation & Error Codes GuideUpdated a month ago

📄 Full Manual

You can download the manual here.

📦 What’s Included

Electric scooter
Power adapter / power cord
2 × post head screws (M5 × 25 mm)
L-shaped wrench
User manual

🧩 Product Overview

Main components:

Handlebar
Dashboard display
Power button
Throttle
Bell
Front and rear brake levers
Turn signals
Headlight and taillight
Folding mechanism
Charging port
Front and rear suspension
Front and rear wheels
Mudguards
Footrest
Kickstand

🎮 Dashboard & Controls

Display Information

Speed (real-time)
Battery level (5 bars + flashing red when critical)
Riding mode indicator
Speed unit (km/h or mph)
Brake indicator

Controls

Power ON/OFF: Hold button for 2 seconds
Lights ON/OFF: Press power button once
Change riding mode: Double press power button
Change units (km/miles): Hold brake + press power button 3 times

Riding Modes (C10)

Eco Mode: up to 15 km/h
Daily Mode: up to 25 km/h
Speed Mode: up to 35 km/h

Additional Features

Pedestrian Mode: ~4 km/h (hold brake + press power twice)
Zero-start setting: Toggle by pressing power button 5 times
Throttle behavior: Motor engages only after ~3 km/h

⚙️ Assembly

Steps

Take scooter out of packaging
Align and insert head tube into frame
Tighten pipe clamp screws using included wrench
Pull folding handle upwards and secure latch

👉 Ensure all bolts and components are securely tightened before riding

🔋 Charging

Steps

Open rubber charging port cover
Insert charger plug
Plug into power outlet
Wait until fully charged
Disconnect charger and close cover

Charger Indicators

Red = charging
Green = fully charged

Important Charging Rules

Do NOT charge if port or cable is wet
Use original charger only
Do NOT charge indoors
Stop using if battery is damaged or flooded
Always close charging port after use

🛵 How to Ride

Wear helmet and protective gear
Turn scooter ON
Check battery level
Push off with one foot
Place both feet on deck
Press throttle to accelerate

👉 Motor activates only after reaching ~3 km/h

Braking

Release throttle
Apply brake gently
Avoid sudden braking

⚠️ Safety Guidelines

General

Always wear protective gear
Follow local traffic laws
Inspect scooter before each ride

Do NOT:

Ride in rain or wet conditions
Ride on highways or public roads
Carry passengers
Ride with one hand or one foot
Use phone or headphones while riding
Ride over obstacles or stairs
Touch motor after riding (may be hot)
Ride under influence of alcohol or drugs

Additional Restrictions

Max load: 120 kg
Recommended rider height: 150–200 cm
Recommended age: 16+

🔧 Maintenance

Clean with damp cloth only
Do NOT use chemicals or solvents
Do NOT use high-pressure water
Regularly check bolts, brakes, and tires
Ensure scooter is powered off before maintenance

⚠️ ERROR CODES

Code	Meaning	Action
E0	Brake failure	Contact support
E1	Communication failure	Restart or contact support
EE	Front motor hall wire failure	Check wiring or contact support
E2	Rear motor hall wire failure	Check wiring or contact support
E3	Over-temperature protection	Stop riding and let it cool
E4	Controller failure	Contact support
E5	Low voltage protection	Charge battery
E6	Blocking protection	Check wheel obstruction
E7	Throttle failure	Check connection or contact support
E8	Over-current protection	Stop and allow to cool
E9	Over-voltage protection	Stop using and contact support

🚨 What to Do if You See an Error

Restart the scooter
Check throttle and brake position
Charge battery if needed
Stop riding if overheating
Contact support if issue persists

📊 Specifications (C10)

General

Max speed: up to 35 km/h
Range: ~40 km
Max load: 120 kg
Weight: ~28 kg
IP rating: IP44

Battery & Motor

Battery: 36V / 10.4Ah (374.4Wh)
Motor: 350W × 2 (peak 700W × 2)

Charging

Charging time: ~7 hours
Charger output: 42V / 1.5A

Tires & Brakes

Tires: 10-inch pneumatic
Brakes: front & rear e-brake + disc brake

Was this article helpful?

Yes

No