InMotion Climber – Full Setup, Charging, Operation & Error Codes GuideUpdated a month ago

📄 Full Manual

You can download the manual here.

📦 What’s Included

• Assembled scooter
• Power cable
• Power adapter
• Kickstand
• Allen wrench
• Hex key
• Screws (M3 / M5)
• Extended air valve
• User manual
• Quick start guide
• Accessories

🧩 Product Overview

Main components:

• Handlebar
• Throttle
• Bell
• Headlight
• Dashboard
• Power button
• Brake lever
• Stem
• Folding mechanism
• Charging port
• Front and rear motors
• Wheels and reflectors
• Footrest
• Kickstand

🎮 Dashboard & Controls

Display Icons & Features

• Pedestrian mode → max speed 6 km/h
• Drive mode (D) → max speed 25 km/h
• Sport mode (S) → max speed 38 km/h
• Speedometer → shows real-time speed
• Battery level → 5 bars (last bar flashing = low battery)
• Bluetooth icon → connected status
• Light icon → headlights ON
• Cruise mode → active when icon appears
• Lock icon → scooter locked
• Error icon → fault detected

Controls

• Power ON/OFF → hold button for 2 seconds
• Change modes → press power button twice
• Lights ON/OFF → single press
• Speed unit change (km/miles) → press 3 times

⚙️ Assembly

Steps

1. Remove scooter from packaging
2. Unfold the stem
3. Lock folding mechanism securely
4. Connect internal wires correctly
5. Tighten stem screws using hex key
6. Install kickstand

🔁 Folding & Unfolding

To Fold

1. Power OFF
2. Hold stem
3. Press locking button
4. Pull lever and fold down
5. Hook stem to rear clip

To Unfold

1. Release hook
2. Raise stem
3. Lock into position

👉 If loose, tighten with provided tools

🔋 Charging

Steps

1. Open rubber charging port
2. Plug in charger
3. Wait until fully charged
4. Unplug and close port

Indicator

• Red = charging
• Green = fully charged

Important Rules

• Do NOT charge if wet
• Use original charger only
• Do NOT charge indoors
• Close charging port after use

📱 App & Activation

Steps

1. Download INMOTION App
2. Power ON scooter
3. Connect via Bluetooth
4. Follow activation steps

👉 Scooter is limited (~5 km/h) until activated

🏁 How to Ride

1. Wear protective gear
2. Turn scooter ON
3. Check battery level
4. Push off with one foot
5. Use throttle to accelerate
6. Brake gently to slow down
7. Step off when stopped

👉 Motor only engages after ~3 km/h

🔧 Tire Inflation

• Recommended pressure: 2.5 – 3.5 bar
• Check before every ride
• Use valve extender if needed

👉 Higher pressure = more range
👉 Lower pressure = more comfort

⚠️ Safety Guidelines

General

• Always wear a helmet
• Ride on flat, stable surfaces
• Follow local laws

Do NOT:

• Ride in rain or wet conditions
• Ride on highways or public roads
• Carry passengers
• Use phone while riding
• Ride with one hand or foot
• Jump or ride stairs
• Ride over sand, gravel, or obstacles
• Touch motor after riding (may be hot)

🔧 Maintenance

Cleaning

• Use a damp cloth
• Do NOT use solvents
• Do NOT use high-pressure water

Battery Care

• Charge regularly
• Do NOT fully drain
• Do NOT expose to extreme temperatures
• Do NOT open battery

Storage

• Keep in a cool, dry place
• Avoid long-term outdoor storage

⚠️ ERROR CODES

🚨 What to Do if You See an Error

• Restart the scooter
• Check throttle and brake position
• Charge battery if needed
• Stop riding if overheating or safety-related
• Contact support if issue persists

Unboxing & assembly/setup: https://www.youtube.com/watch?v=mzkA_jX9OHE