InMotion RS / RS Lite – Full Setup, Charging, Operation & Error Codes GuideUpdated a month ago

📄 Full Manual

You can download the manual here.

📦 What’s Included

• Scooter unit
• User manual
• Quick start guide
• Power cord / adapter
• Headlights
• Mudguard components
• Reflectors (×2)
• Reflector stickers (×10)
• Combination wrench
• T-shaped wrench (×2)
• Screws and mounting hardware

🧩 Product Overview

Main components:

• Handlebar assembly
• Dashboard display
• Throttle twist grip
• Brake levers
• Turn signals
• Horn
• Headlight and tail light
• Folding mechanism
• Stem
• Central control assembly
• Charging port
• Front and rear motor wheels
• Front clearance light
• Rear turn signals
• Rear fender
• Dual disc brakes
• Foot deck

🎮 Dashboard & Controls

Display Information

• Speedometer (real-time speed)
• Battery level (5 bars)
• Total mileage (ODO)
• Trip distance
• Drive mode indicator
• Fault indicator
• Bluetooth connection status
• Headlight indicator
• Turn signal indicators
• Lock/unlock icon

Controls

• Power ON/OFF → press and hold
• Shift up / down (+ / -) → change modes
• Headlights → toggle via button
• Turn signals → left/right buttons
• Horn → press button
• Cruise control → short press
• Single/Dual motor switching → long press cruise button
• Lock/Unlock → via app

⚙️ Riding Modes

• Mode 1 (Eco) → up to ~32 km/h
• Mode 2 (Normal) → up to ~64 km/h
• Mode 3 (Sport) → up to ~100 km/h
• Mode 4 (Extreme) → no speed limit

👉 Cannot change mode while accelerating

Additional Features

• Parking mode (default at startup)
• Auto power off after inactivity (~10 min)
• Single/Dual drive modes:
  • Dual → Rear → Front motor switching sequence

⚠️ ERROR CODES

Motor / Controller Errors

👉 First digit:

• 1 = front motor
• 2 = rear motor

Other Errors

⚙️ Assembly

Steps

1. Remove scooter and accessories from packaging
2. Install handlebar and front headlight assembly (use screws provided)
3. Install rear mudguard
4. Connect waterproof cables (match colors and directions)
5. Unfold and adjust stem height
6. Secure folding mechanism and safety latch
7. Tighten all screws and bolts

👉 Ensure all components are fully secured before use

📱 Activation (Required)

Scooter is limited until activated.

Steps:

1. Download INMOTION App
2. Power ON scooter
3. Connect via Bluetooth
4. Follow activation instructions

👉 Before activation:

• Limited to ECO mode

🔋 Charging

Steps

1. Open charging port cover
2. Plug charger into scooter
3. Plug into wall outlet
4. Wait until fully charged
5. Disconnect and close port

Charger Indicators

• Blue = power
• Red = charging
• Green = fully charged

Important Charging Rules

• Use original charger only
• Do NOT charge if wet
• Do NOT charge indoors
• Do NOT charge if battery is damaged
• Charge every 3 months if unused

👉 Dual charging reduces charging time by ~50%

🔧 Tire Inflation

• Recommended pressure: 2.5 – 3.5 bar
• Check before every ride

👉 Higher pressure = more range
👉 Lower pressure = more comfort

🛵 How to Ride

1. Wear protective gear
2. Turn scooter ON
3. Check battery level
4. Push off with one foot
5. Place both feet on deck
6. Use throttle to accelerate

Braking

• Release throttle
• Apply brakes gradually
• Avoid sudden braking

⚠️ Safety Guidelines

MUST DO

• Wear helmet and protective gear
• Ride in safe, open environments when learning
• Follow local laws

DO NOT:

• Ride in rain or wet conditions
• Ride on highways or public roads
• Carry passengers
• Ride with one hand or one foot
• Use phone or headphones while riding
• Ride over obstacles, stairs, or rough terrain
• Rotate handle sharply at high speed
• Touch motor after riding (may be hot)

Additional Safety Notes

• Max load: 150 kg
• Recommended age: 16–60 years
• Recommended height: 150–200 cm
• Practice in safe environment before full use

🔧 Maintenance

Cleaning

• Use soft damp cloth
• Avoid chemicals and solvents
• Do NOT use pressure washers

Battery Care

• Do NOT disassemble battery
• Avoid extreme temperatures
• Store at ~60% charge if not used
• Recharge every 30–60 days
• Avoid full discharge

Storage

• Store indoors in cool, dry place
• Avoid sunlight and moisture

⚠️ Riding & Safety Inspection

Before each ride:

• Check battery level
• Check tire pressure
• Ensure no loose parts
• Confirm brakes working
• Stop immediately if abnormal sounds, smells, or alarms

📊 Specifications

General

• Max speed: up to 110 km/h
• Range: ~120–160 km
• Max load: 150 kg
• Weight: ~58 kg
• Waterproof rating: IP56

Battery & Motor

• Battery: 84V / 2880Wh
• Motor power: 2000W × 2 (max 4200W × 2)
• Intelligent BMS:
  • Overcharge protection
  • Over-discharge protection
  • Overcurrent protection
  • Short circuit protection
  • Overvoltage protection

Charging

• Charging time: ~8.5 hours
• Charger: 84V / 5A

Tires & Display

• Tires: 11-inch vacuum tires
• Display: 4.3-inch LCD
• USB output: Type-C

https://www.youtube.com/watch?v=peyU2vNAiZw