InMotion RS Jet โ Full Setup, Charging, Operation & Error Codes GuideUpdated a month ago
๐ Full Manual
You can download the manual here.
๐ฆ Whatโs Included
- Scooter unit
- User manual
- Mudguard components
- Power cord / adapter
- Headlights
- Combination wrench
- Hex key (6#)
- Open-end wrench (27#)
- Screws and washers
๐งฉ Product Overview
Main components:
- Throttle twist grip
- Dashboard display
- Headlight
- Turn signals
- Dual motor wheels (front & rear)
- Disc brakes
- Charging port
- Folding mechanism
- Central control assembly
๐ฎ Dashboard & Controls
Key Functions
- Power ON/OFF: Press and hold power button
- Drive modes:
- E = Eco (24 km/h)
- D = Normal (48 km/h)
- S = Sport (70 km/h)
- X = Extreme (up to 80 km/h)
- Cruise control: Short press
- Single/Dual motor: Long press cruise button
- Turn signals: Button activated
- Headlights: Toggle button
- Horn: Press button
- Lock/Unlock: Via app
๐ The scooter starts in Parking mode by default
โ ๏ธ ERROR CODES
Drive Controller / Motor Errors
| Code | Meaning | Action |
|---|---|---|
| 101 / 201 | Controller current sampling failure | Restart or service |
| 102 / 202 | Motor hall fault | Service required |
| 109 / 209 | No data from controller | Communication issue |
| 110 / 210 | No data from display | Communication issue |
| 111 / 211 | Controller overheating | Stop and let it cool |
| 112 / 212 | Motor overheating | Stop and let it cool |
| 114 / 214 | MCU overheating | Stop and let it cool |
| 117 / 217 | Overcurrent fault | Restart or service |
| 118 / 218 | Motor stuck | Remove obstruction / service |
๐ First digit indicates:
- 1 = front motor
- 2 = rear motor
Other Errors
| Code | Meaning | Action |
|---|---|---|
| 003 | Battery communication failure | Service required |
| 004 | Undervoltage | Charge battery |
| 005 | Overvoltage | Stop using |
| 006 | Brake fault | Release or check brake |
| 007 | Throttle fault | Release or check throttle |
| 008 | Battery error | Service required |
| 013 | Battery overheating | Stop and let it cool |
| 019 | Firmware update required | Update via app |
โ๏ธ Assembly
Key Steps
- Unbox and remove packaging
- Install handlebar and headlight
- Install rear fender
- Connect waterproof cables (match colors)
- Secure all bolts and components
๐ฑ Activation (Required)
The scooter is limited until activated.
Steps:
- Download the INMOTION App
- Turn the scooter ON
- Connect via Bluetooth
- Follow the app instructions
๐ Charging
Steps:
- Open charging port
- Insert charger
- Wait until fully charged
- Unplug and close the port
Charger Indicators:
- Blue = power
- Red = charging
- Green = fully charged
Important Rules:
- Do NOT charge if wet
- Use original charger only
- Do NOT charge indoors
- Charge every 3 months if unused
๐ง Tire Inflation
- Recommended pressure: 2.5 โ 3.5 bar
- Higher pressure = more range
- Lower pressure = more comfort
๐ How to Ride
- Wear protective gear
- Check battery level
- Push off with one foot
- Use throttle to accelerate
- Use brake to slow down
- Step off when stopped
โ ๏ธ Safety Guidelines
Do NOT:
- Ride in rain
- Ride fast over bumps or rough terrain
- Ride with one hand or one foot
- Carry passengers
- Use your phone while riding
- Ride on highways or public roads
- Jump or ride stairs
- Touch the motor after riding (it may be hot)
๐ง Adjustments
Brake Adjustment
- Adjust brake signal using hex wrench
- Modify lever travel as needed
Deck Height Adjustment
- Clockwise โ lower
- Counterclockwise โ raise
Unboxing & Assembly video:ย https://www.youtube.com/watch?v=peyU2vNAiZw