Segway Ninebot F3 / F3 Pro – Full Setup, Charging, App Features, Operation & Safety GuideUpdated a month ago

Full Manual

Overview

The Segway Ninebot F3 and F3 Pro are electric kick scooters designed for urban commuting. This guide covers setup, activation, controls, features, and key safety information.

Safety & Requirements

• Minimum age: 14+
• Minimum height: 140 cm
• Always wear:
  • Helmet
  • Elbow pads
  • Knee pads

The Segway Mobility App contains additional safety warnings and instructions that form part of the official user materials and should be reviewed before riding. 

What’s in the Box

• eKickScooter (F3 or F3 Pro)
• User manual
• Important information booklet
• Charger
• Allen keys (2.5 mm, 3 mm, 4 mm, 5 mm)
• Screws

Note: Keep the original packaging for at least 15 days. 

Assembly Instructions

1. Unfold the scooter
   • Raise the stem and close the quick-release lever until the folding latch reaches the bottom.
   • Ensure the lever is securely locked.
2. Install the handlebar
   • Insert the handlebar and cables into the stem with the headlight facing forward.
   • Secure with four screws using a 4 mm Allen key (tightening torque: 9 ± 1 N·m).
3. Final setup
   • Remove the scooter from the box, place it on the ground, and unfold the kickstand.

Important:

• Power off the scooter before assembly
• Do not wrap the brake cable around the stem

Activation (Required Before First Use)

If the scooter is not activated:

• It will continue beeping when turned on
• Speed is limited to 15 km/h

Activation Steps

1. Download the Segway Mobility App
2. Charge the scooter briefly (approximately 3 seconds) to activate the battery
3. Power on the scooter
4. Scan the QR code or use “Search vehicle” in the app to pair
5. Follow instructions in the app and complete activation

After activation:

• Default speed mode is Drive (D) mode

Controls and Functions

Main Controls

• Power Button / Headlight
  • Press to power on
  • Hold for 2 seconds to power off
  • Press to cycle headlight modes: On → Auto → Off
• Mode Switching Button
  • Switch between speed modes
• Throttle
  • Twist/press to accelerate
• Brake Lever
  • Used for braking
• Bell Button
  • Activates the bell
• Direction Indicator Buttons
  • Press left/right to activate indicators
  • Press again to turn off
  • Hold for 2 seconds to activate/deactivate hazard lights
• Custom Button
  • Default: Hill-Hold Assist
  • Can be customised via the app

Hill-Hold Assist

• Locks the drive wheel when the scooter is fully stopped
• Prevents the scooter from moving when throttle is applied
• Press again to disengage
• Can also be activated by holding the brake lever for 3 seconds

Dashboard Indicators

The dashboard displays:

• Headlight status
• Bluetooth connection
• Trip distance
• Battery level (red when below 10%)
• Traction Control System (TCS) status
• Time
• External battery level (if installed)
• Direction indicators
• Current speed
• Remaining range
• Warning indicator (number of detected errors)

Speed Modes

Important:

• Speed limits vary by model/version
• Some F3 Pro variants are limited to 20 km/h in Sport mode

App Features

Customisable via the Segway Mobility App:

• Start speed
• Traction Control System (TCS)
• Energy recovery (regenerative braking)
• Charging limit
• Scheduled charging
• Custom button configuration
• Unit system (metric/imperial)
• Light effects
• Speed mode customisation
• Locking functions

Energy Recovery (Regenerative Braking)

Function Overview

• Activated when the throttle is released
• Creates resistance via the motor to slow the scooter
• Adjustable levels: Off / Weak / Strong
• Default setting: Off

Important Safety Notes

• Assists braking but does not replace the brake system
• Always use the brake lever to stop safely
• Requires practice before use
• Use caution on downhill terrain (gravity may still cause acceleration)
• Not active in cruise control mode
• Status is only visible in the app (not on dashboard)
• Remains enabled until manually turned off in the app

Security Features

CodeLock

• Enabled via app (digital or pattern password)
• Digital password: 4 digits
• Pattern password: 4–8 directional inputs
• Maximum of 3 incorrect attempts before screen powers off
• Continued incorrect attempts trigger an alert

AirLock

• Bluetooth-based unlocking
• Automatically connects when phone is nearby
• Requires passcode setup first via the app

Lighting

• Headlight modes: On / Auto / Off
• Headlight and tail light remain on in Walk Mode
• Front position lamp can be controlled via the app (select models only)

Battery Information

• Displays remaining battery level on dashboard
• External battery supported (sold separately)
• External battery level shown when installed
• Charging features configurable via the app

Additional Notes

• Features may vary depending on app and firmware versions
• Always refer to the Segway Mobility App for the latest functionality
• Users should inform others of configured settings (e.g. energy recovery) before use

Segway F3 Series-Instrument assembly