Segway SuperScooter GT3 – Setup, Charging, Operation, Maintenance & Features GuideUpdated 10 days ago

MANUAL

WHAT’S IN THE BOX

1x Segway SuperScooter GT3
1x User Manual
1x Product Manual
1x Important Information booklet
1x 4 mm Allen wrench
1x 5 mm Allen wrench
1x Hanging hook
1x Battery charger
8x M6 screws (2 are backup screws)
1x Valve stem extension

SETTING UP YOUR NEW E-SCOOTER

Only an adult can assemble and adjust this SuperScooter.

Unfold the stem and close the quick release lever.
Avoid pinching the wires inside the stem while unfolding.
Slide the handlebar and the wires into the stem with the headlight facing forward.
Make sure the wires inside the handlebar and the stem are connected.
Align the hanging hook with the two screw holes on the rear of the stem.
Pre-tighten the 6 screws in order using a hex wrench.
Fully tighten all screws in the same order.
Tightening torque for these screws is 6–8 N·m.
Lift the SuperScooter, place it on flat ground, and unfold the kickstand.
Press down the quick release lever firmly to make sure the folding mechanism is tightened.
Check the safety button and make sure it has returned to position.

Important setup notes

Do not use an electric screwdriver.
Make sure the folding mechanism is fully tightened.
The manual shows the quick release lever should move from pre-locked to locked into position.
Before riding, check that the safety button has returned to its proper position.

ACTIVATION

An inactivated SuperScooter can only ride in ECO Mode.
Before first use, charge the SuperScooter for three seconds to activate the battery.
Power on the SuperScooter.
Scan the QR code to download the Segway-Ninebot App and register or log in.
Scan the QR code shown on the dashboard in the app, or tap Search Vehicle and pair with the displayed SuperScooter.
Follow the instructions and watch the Riding Safety video.
Tap to activate the SuperScooter.
The Bluetooth symbol lights up when the SuperScooter is connected to the Segway-Ninebot App.

SEGWAY-NINEBOT APP

The manual shows these app features:

Track Records
Electronic Brake Sensitivity
Energy Recovery
Charging Limit and Scheduled Charging
Start Speed
Customize Mode Speed
Incoming Call Notification
Locking Function
CodeLock
AirLock
Abnormal Movement Alert

RIDING INSTRUCTIONS

Before riding:

Squeeze the brake levers quickly and then slowly.
Repeat this 5 times each to ensure the brakes work properly.
Check the battery level and tyre pressure.

Starting and riding

Power on the SuperScooter.
Choose the speed mode before riding.
Stand on the footboard with one foot and push off with the other foot to start gliding.
Put both feet on the footboard and stand stably.
Twist the throttle to speed up.
Slow down by releasing the throttle and squeezing the brake levers.
To turn, shift your body and turn the handlebar slightly.
Stop the SuperScooter and put down the kickstand when finished.

Start speed

The manual states:

Model 060203PC start speed: 0 km/h (0 mph)
Models 060202E and 060202D start speed: 3 km/h (1.86 mph)
Start speed can be customised through the Segway-Ninebot App.

Riding notes

Choose the speed mode before riding.
Turning requires enough space, so watch road conditions carefully.
When minors are learning or riding this SuperScooter, they should be supervised by guardians throughout the process.
Hard braking may lead to serious danger or injury. Maintain a moderate speed, shift the body’s centre of gravity backward, and watch for hazards.

AUTO HEADLIGHT

Rotate the Left Control Switch to switch to Auto Headlight Mode.
“Auto Headlight Light On” will appear on the screen.
In Auto Headlight Mode, the headlight turns on or off according to ambient brightness.

Auto headlight beam switching

Only for model 060203PC

If speed is ≤ 40 km/h (25 mph), the headlight enters Low Beam Mode
If speed is > 40 km/h (25 mph), the headlight enters High Beam Mode
After slowing to ≤ 40 km/h (25 mph), the headlight returns to Low Beam Mode in 3 seconds

CRUISE CONTROL

Only for model 060203PC

How to enable

When speed is ≥ 5 km/h (3.1 mph), press the Left Control Switch to enable Cruise Control.
When Cruise Control is enabled:
- the buzzer sends two short beeps
- the icon lights up on the screen
- the SuperScooter continues at a constant speed
- it does not decelerate when the throttle is released

How to disable

Cruise Control can be ended by:

pulling the braking lever
rotating the Right Control Switch
twisting the throttle again after releasing it
pressing the Left Control Switch again

When disabled:

the icon turns off
“Cruise Control Off” appears on the screen.

Important notes

The SuperScooter cannot enter Cruise Control below 5 km/h (3.1 mph).

AUTOMATIC HILL HOLD

When stopped on an uphill or downhill section, pull the brake lever for 3 seconds to enable Automatic Hill Hold.
“Auto Hold On” appears on the screen.
When enabled:
- the speedometer displays H
- the driving wheel is locked to prevent rolling away
Pull the brake lever again to end Automatic Hill Hold.
“Auto Hold Off” appears on the screen and the driving wheel unlocks.

ULTRA BOOST

In RACE Mode, press the Right Control Switch once to activate Ultra Boost.
“Ultra Boost Activated” appears on the dashboard.
An Ultra Boost Power Bar is shown on the dashboard.
Twist the throttle to use Ultra Boost.
The SuperScooter then accelerates very strongly, while the Ultra Boost Power Bar energy decreases.
Ultra Boost ends when the Power Bar runs out.
It can also be ended by:
- pressing the Right Control Switch
- switching to another speed mode
The SuperScooter needs some time to restore energy before Ultra Boost can be used again.

CHARGING

The SuperScooter is fully charged when the charger LED changes from red to green.
The SuperScooter may not charge if the battery temperature is too high or too low.
If that happens, leave the SuperScooter still until battery temperature returns to room temperature.

Charging warnings

Do not charge if the charge port, battery charger, or power cord is wet.
Only use the original battery charger provided by the manufacturer.
Do not use a charger from another product.
Do not charge or use the battery if it is damaged or if there are visible traces of water.
Close the charge port cover when not charging.
For indoor use only.

Charging steps

Open the charge port covers.
Insert the charge plug.
Close the charge port covers when finished.

Battery sleep mode

If battery power is under 30% and the scooter is not powered on for about 7 consecutive days, the battery enters sleep mode.
If this happens, the scooter cannot be powered on.
Charge it for three seconds to activate the battery.

LOCKING FUNCTIONS

Incoming Call Notification

Enable Incoming Call Notification in the Segway-Ninebot App and allow access to mobile phone contacts.
When the SuperScooter is connected to the app while powered on:
- incoming call number and name appear on the screen
- the buzzer beeps every 3 seconds
- it stops after 3 rounds of beeps
If the incoming call is answered or hung up on the phone, the screen notification ends as well.

CodeLock

CodeLock can be enabled or disabled in the Segway-Ninebot App from:

Homepage
More Functions
Locking Function

The manual shows two options:

Pattern CodeLock
Digital CodeLock

Pattern CodeLock

Enable the locking function through the app and set a pattern unlocking password.
Set a 4 to 8 input password using:
- Left Brake Lever
- Right Brake Lever
- Left Control Switch
- Right Control Switch
Power on the SuperScooter and unlock it by operating the buttons and switches.
After entering the correct password:
- the scooter powers on automatically
- the buzzer sends two short beeps
If the password is incorrect:
- “Wrong Password” appears on the screen
- the buzzer sends a long beep
- the rider must enter the password again

Digital CodeLock

Enable the locking function through the app and set a 4-digit unlocking password.
The manual notes the password should not be too simple, such as 0000 or 9999.
Press the power button to wake up the dashboard.
Enter the password using the direction indicator switch:
- → increases the number by one
- ← decreases the number by one
Press the Left Control Switch or squeeze the brake lever once to confirm each number entered.
The rider can rotate the control switch to check the entered password.
After entering the correct password:
- the scooter powers on automatically
- the buzzer sends two short beeps
If the password is incorrect:
- “Wrong Password” appears on the screen
- the entered password is also displayed
- the buzzer sends a long beep
- the rider must enter the password again

Failed password attempts

You can set either Pattern CodeLock or Digital CodeLock.
If the rider enters an incorrect password three consecutive times:
- “Too Many Times Failure” appears on the screen
- the scooter powers off
If the password is entered incorrectly a fourth time, the SuperScooter sends an alert.

AirLock

AirLock can be enabled via the Segway-Ninebot App.
CodeLock must be set first.
When the rider approaches the SuperScooter with a mobile phone and enters Bluetooth sensing range:
- the SuperScooter detects and connects to the phone’s Bluetooth signal
- the SuperScooter unlocks
After unlocking:
- the direction indicators flash twice
- the rider can power on and ride away directly
If the SuperScooter is not unlocked:
- the direction indicators do not flash
- pressing the power button shows “AirLock Failed”
- the rider can then press the power button and unlock by password
After unlocking via AirLock, if the SuperScooter cannot detect the mobile phone Bluetooth signal, it will power off automatically and lock.
The manual notes that sensing range and unlocking sensitivity may vary between phone brands and situations.

Abnormal Movement Alert

Abnormal Movement Alert turns on automatically after enabling the locking function in the Segway-Ninebot App.
It can also be disabled through the app.
If abnormal movement is detected while locked:
- the buzzer alerts for 5 seconds
- it gives a short alert every 0.5 second
- “Abnormal Movement Detected” appears on the screen
If no abnormal movement occurs after 5 seconds, the alert stops.
If abnormal movement continues:
- the horn alerts at maximum volume
- lights flash
- the driving wheel is locked

ENERGY RECOVERY

In the Segway-Ninebot App, Energy Recovery can be set to:

Off
Strong
Weak

How it works

By default, Energy Recovery is set to off.
When enabled, releasing the throttle while riding automatically activates Energy Recovery.
The motor then produces reverse electromotive force, slowing the vehicle and creating a noticeable deceleration effect.
When set to strong, deceleration is more evident.

Important notes

Energy Recovery assists braking and does not replace the braking system.
Use the brake lever when you need to stop or slow down safely.
Use extra caution on downhill sections or under special riding conditions.
Releasing the throttle on a decline may still result in acceleration from gravity and inertia, while Energy Recovery applies decelerative force.
Energy Recovery does not engage while Cruise Control is active.
Once Cruise Control is disengaged, releasing the throttle activates Energy Recovery if it is already enabled in the app.
Once enabled, Energy Recovery stays on until manually turned off in the app.
The dashboard does not display Energy Recovery status.
Borrowers should be informed of the current Energy Recovery setting.
For questions about this function, contact Technical Support.

SAFETY INSTRUCTIONS

Always wear a helmet, elbow pads, and knee pads.
Rider age range shown in the manual: 18–60 years old
Rider height range shown in the manual: 160–200 cm (5.3–6.6 ft)
Watch road conditions carefully and allow enough turning space.
Before each ride, check brake function, battery level, and tyre pressure.
Hard braking can cause serious danger or injury.
Only adults should assemble and adjust the SuperScooter.

GT3 UNBOXING AND ASSEMBLY VIDEO

Was this article helpful?

Yes